10
Connecting a computer source
Required computer connections
Connect one end of the provided computer cable (see page 15 for connect-
ing video devices) to the blue M1-DA connector on the projector. Connect
the other ends (USB and VESA) to the USB and VGA ports on your com-
puter. If you are using a desktop computer, you will need to disconnect the
monitor cable from the computer’s video port first.
This connection allows you to advance slides in a PowerPoint presentation
using an optional remote. USB drivers must be installed to use the USB fea-
ture.
For more information, see page 14.
Connect the black power cord to the Power connector on the side of the pro-
jector and to your electrical outlet.
NOTE: Always use the power cord that shipped with the projector.
Optional computer connections
To have sound with your presentation, connect an audio cable (not
included) to your computer and to the red and/or white Audio In connec-
tors on the projector.
connect computer cable
connect power cable
connect audio cable
To Next Page
Loading...
Need help?
General