6 7
Important Information Table of contents
The finetest Auto-coding
TM
Blood Glucose Monitoring System is intended for
use outside the body (in vitro diagnostic use only). It should be used only for
testing blood glucose and only with fresh capillary whole blood samples. It
should not be used for the diagnosis of diabetes.
Consult your physician or diabetic healthcare professional about daily
management of your diabetes and proper use of the glucometer.
Please pay close attention when handling blood. Improper procedures may
cause serious hazards to your health.
The finetest Auto-coding
TM
Blood Glucose Monitoring System contains small
parts. Please keep your monitoring system out of reach of children
1. Learning the System
finetest Auto-coding
TM
Blood Glucose Monitoring System KIT Contents 8
finetest Auto-coding
TM
Blood Glucose Meter 9
finetest Auto-coding
TM
Blood Glucose Meter Display 10
finetest Auto-coding
TM
Blood Glucose Test Strip 11
Important Finetest Auto-coding
TM
Test Strip Information 12
2. Before Testing
Setting the Meter 13 - 15
Auto-Coding Function 16
Checking the System with the finetest Auto-coding
TM
Control Solution 17
3. Testing Your Blood Glucose
Testing Your Blood - Preparation 19
Collecting a Drop of Blood 20
Testing Procedure 21 - 24
Test Strip Ejector Function 25
4. Reviewing Your Results 26 - 27
5. Deleting Test Results 28
6. finetest Auto-coding
TM
Software 29
7. Taking Care of Your Blood Glucose Meter
Cleaning Your Meter and Maintenance 30
Replacing the Batteries 31
8. Troubleshooting 32 - 35
9. Test Principle and Performance 36
10. Specifications 37
11. Conversion table mmol/L <––> mg/dL 38
12. Warranty 39
13. Symbols Reference 40
Contents PAGE
To Next Page
Loading...
