The Table of Contents
About Your New System page
Blood Glucose Monitoring System KIT Contents 8
Blood Glucose Test Meter 9
Blood Glucose Test Meter Display 10
Blood Glucose Test Strip information 11-12
Before You Test
Setting up Your Monitor 13~14
Checking the Meter with the Check Strip 15
Seting the Code to Match Your Test Strip 16
Performing Your Test
Before you Test 17
Collecting a Drop of Blood 18~20
Test Your Blood - Preparation 21~22
Performing Your Test 23~24
Performing a Control Solution Test 25~27
Reviewing Your Results 28~29
Alternate Site Testing 30
Performing a Blood Test Using and Alternate Site 30~32
Downloading Your Glucose Readings 33
Caring for Your Glucolab Meter 34
Changing Your Battery 35
Disposal of meter and batteries 36
Trouble Shooting 37~40
Specifications 41
Warranty 42
Symbol Reference 43
7
6
Caution :
Before using any product, please read all instructions. Consult
your physician or diabetic healthcare professional about daily
management of your diabetes and proper use of the glucometer.
If you have any questions about the product, please
contact your local representative.
Intended use of
Blood Glucose Test Meter
The Blood Glucose Monitoring System is
intended for in vitro diagnostic use only.
Blood Glucose Monitoring System is for self-testing. It
should not be used for the diagnosis of diabetes or for the testing of
newborns.
The was designed to test a blood glucose (sugar)
level and can be used with a capillary whole blood sample.
Do not use the Blood Glucose Monitoring System
for any other than for blood glucose testing.
To Next Page
Loading...
