EasyManuals Logo

inform DSP FLEXIPOWER SERIES User Manual

inform DSP FLEXIPOWER SERIES
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
5
3.3. Storage
Please store the UPS in an environment where the temperature is between 15 C +40 C, no
receipt of direct sunlight, far from the heating, in a dry place.
Environmental humidity must be between 30% 90% (non-condensing).
Recommended storage temperature, humidity and altitude values are listed on the Appendix-2
Technical Specifications section.
If the batteries will be stored for longer than 6 months, they shall be charged periodically. Charge
period depends on the storage temperature. The relationship is as shown below:
Every 9 months if the temperature is below 20°C,
Every 6 months if the temperature is between 20°C and 30°C,
Every 3 months if the temperature is between 30°C and 40°C,
Every 2 months if the temperature is over 40°C
For long storage duration; please follow up the instructions of installation described in Section 4,
start-up UPS described in Section 7 and charge the batteries at least 12 hours.
30%~90%
Relative Humidity
(non-condensing)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the inform DSP FLEXIPOWER SERIES and is the answer not in the manual?

inform DSP FLEXIPOWER SERIES Specifications

General IconGeneral
Brandinform
ModelDSP FLEXIPOWER SERIES
CategoryUPS
LanguageEnglish

Related product manuals