The packing condition and the external outlook of the unit should be inspected
carefully before installation. Retain the packing material for future use.
3.1.Unpacking
1. Take the UPS out of the PE foam.
2. Unwrap the UPS.
a. The UPS itself is approx. 12.5~39kgs, so be careful when unpacking and
lifting the unit. Improper use of force might harm yourself.
b. The plastic bag holding the UPS is very slippery, so be careful in
Unpacking and holding the unit. The unit might drop accidentally
and harm yourself.
3. Standard Package includes:
- User's Manual
- AC Input Power Cord
- IEC output cables
- RJ11 Phone Jack Cable ( at rack model only )
- UPS communication kit (optional)
3.2.Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the advice below:
1. Keep at least 20cm(8 inches) clearance from the rear panel of the UPS to
the wall.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please check the installation site to avoid overheat and excessive moisture.
4. Do not place the UPS in an environment near dusty, corruptive or salty
material or flammable objects.
5. Do not expose the UPS to outdoors.
3.3.Operation Test and Installation Instruction
To Next Page
Loading...
