IMPORTANT SAFETY INSTRUCTIONS
*Save these instructions
This manual contains important instructions that should be followed during
installation and maintenance of the UPS and batteries.
Important Notices:
• To ensure safety in all applications where an UPS is hard wired to the Electrical Supply,
ensure that the system is installed by authorized staff.
• Those UPS systems supplied with a factory input lead can be safely connected to the
wall socket by the purchaser.
• The UPS has its own internal energy source(battery). Should the battery be switched
on when no AC power is available, there could be voltage at the output terminals.
• Make sure that the AC Utility outlet is correctly grounded.
• Do not open the case as there are no serviceable parts inside. Your Warranty will be
void.
• Do not try to repair the unit yourself, contact your local supplier or your warranty will be
void.
• Please make sure that the input voltage of the UPS matches the supply voltage.
• Use a certified input power cable with the correct plugs and sockets for the appropriate
voltage system.
• To eliminate any overheating of the UPS, keep all ventilation openings free from
obstruction, and do not store "things" on top of the UPS. Keep the UPS 20 cm away
from the wall.
• Make sure the UPS is installed within the proper environment as specified. (0-40°C
and 0-95% non-condensing humidity)
• Do not install the UPS in direct sunlight. Your warranty may be void if the batteries
fail.
• Install the UPS indoors as it is not designed for installation outdoors.
• Dusty, corrosive and salty environments can do damage to UPS.
• Install the UPS away from objects which give off excessive heat and areas which are
excessively wet.
• If liquids are split onto the UPS or foreign objects dropped into the unit, the warranty
will be null and void.
• The battery will discharge naturally if the system is unused for any length of time.
• It should be recharged every 2-3 months if unused. If this is not done, then the
warranty will be null and void. When installed and being used, the batteries will be
automatically recharged and kept in top condition.
• This UPS supports electronic equipment in offices, telecommunications, process
control, medical and security applications.
To Next Page
Loading...
