100%~120% delay 60 seconds before switching to
bypass; 120%~150% delay 10 seconds before switching
to bypass; >150% immediately switch to bypass
a) Inv. Mode: UPS shutdown and Cut the Output.
b) Bypass Mode: AC Input fuse Breaks down.
a) Utility Normal: Switch to Bypass.
b) Utility Abnormal: Buzzer sounds continuously,
Fault LED lights up then cut the output.
Alarm continuously till battery cutoff
Line Failure, Battery Low, Transfer to Bypass, Overload,
System Fault Conditions
Dimensions ā
TOWER TYPE
(WxHxD, mm)
Dimensions -
RACK TYPE
(WxHxD, mm)
0~95% RH Maximum, Non-Condensing