Infortrend EonStor DS S16E-R2142 - Restore Default LED for RAID Models; Ethernet Management Port LED for RAID Models

EonStor DS S12/S16/S24 Series Hardware Manual
4.3.3 Restore Default LED for RAID Models
Restore Default Button/LED
Name Color Status
Restore Default Green
Lit Green to indicate the RAID configuration
default has been successfully restored. The
LED state will be invalidated after a few
seconds.
See below for how to use the push button.
4.3.4 Ethernet Management Port LED for RAID Models
One Ethernet management port is located on each controller’s faceplate. Two LEDs
indicate Ethernet connection speed and link status.
Ethernet Management Port
Link LED
A
ctivity LED
Name Status Status
Link Status On (Green)
The management port is connected to a
node or networking device.
LAN Activity
Blinking
(Green)
There is active data transmission.
115