EonStor DS S12/S16/S24 Series Hardware Manual
5 System Maintenance
WARNING
Do not remove a failed component from the system until you have a replacement on
hand. If you remove a failed component without replacing it, the internal airflow will
be disrupted.
Qualified engineers who are familiar with the system should be the only ones who
make component replacements.
When inserting a removable module, do not use excessive force. Forcing or
slamming a module can damage the connector pins either on the module itself or on
the backplane.
The following components can be replaced:
Controller module (See 5.1 Replacing the Controller Module for details.)
Memory module (See 5.2 Replacing the Memory Module for details.)
CBM module (See 5.3 Replacing the CBM for details.)
PSU
module (See 5.4 Replacing the Power Supply Module for details.)
Hard drive (See 5.6 Replacing a Hard Disk Drive for details.)
126
To Next Page
Loading...