EonStor DS S12/S16/S24 Series Hardware Manual
3.6 JBOD Connections
A 50cm SFF-8088 to SFF-8088 or SFF-8088 to SFF-8470 host link cables are
included. You need to purchase other cables if you need more than the included
cables or a cable of different length. Shown below are some details of the included
and optional SAS external cables:
Infortrend’s part numbers for cables of different lengths are:
IFT-9270CmSASCab1 SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088), 50cm.
IFT-9270CmSASCab2 SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088),
120cm.
*IFT-9270CmSASCab3
SAS external cable, SFF-8088 to SFF-8470, 50cm.
*IFT-9270CmSASCab4
SAS external cable, SFF-8088 to SFF-8470, 120cm.
*IFT-9270CmSASCab5
SAS external cable, SFF-8088 to SFF-8470, 170cm.
IFT-9270CmSASCab6 SAS external cable, Mini SAS 4x to Mini SAS 4x (SFF-8088),
170cm.
#IFT-9270CmSASCab7
Pull type, SAS external cable, Mini SAS 4x to Mini SAS 4x
(SFF-8088), 50cm
#IFT-9270CmSASCab8
Pull type, SAS external cable, Mini SAS 4x to Mini SAS 4x
(SFF-8088), 120cm.
^9270CSASCab01
SAS external cable, SFF-8470 to SFF-8470, 50 Centimeters
^9270CSASCab02
SAS external cable, SFF-8470 to SFF-8470, 120 Centimeters
The cable features include: 28AWG x 8 pair, 100ohm, black, UL approved, lead-free,
50cm, 120cm, or 170cm cable lengths, and connectors that can be secured to
chassis using thumb screws or latching mechanism.
*Cables are used for SAS 3Gb/s S12S-J1000G, S16S-J1000R/S JBODs to connect
to RAID systems.
#Cables are used for SxxS-G/R2240-4 models
^Cables are used for SAS 3Gb/s S12S-J1000G, S16S-J1000R/S JBODs to expand
to other JBODs
89
To Next Page
Loading...