EonStor DS S12/S16/S24 Series Hardware Manual
Po
wer supply:
S12 & S16: The hot-swappable power supply units (PSUs) provide power to the
subsystem. Power supplies come with a designation 0 for the one on the
left and 1 for the PSU on the right. A power switch can be located on each
PSU.
S24: There are three hot-swappable power supply units to supply power to the
subsystem. The power supplies have a designation of 0 for the one on the
left, 1 for the one in the middle and 2 for the one on the right. A power
switch can be located on right hand side of PSU 1.
Cooling modules:
S12 and S16: The redundant cooling modules ventilate the system and are
embedded in the power supplies.
S24: The cooling modules are user serviceable and are standalone units on
both sides of the controller.
JBOD Models
S12S-J1000 models
S12S-J1002R, S12S-J2000R/G, S16S-J1000R/G
20
To Next Page
Loading...