EasyManua.ls Logo

Infranor XtrapulsPac - Page 95

Infranor XtrapulsPac
239 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
95
X
trapulsPac - User Guide
Chapter 3 – Reference
Bit Numbe
r
Description
0 1 Enabled
0
1 1 TTL Encoder
0
2 1 Sin/Cos Encoder
0
3 1 Encoder with CD track
0
4 1 HES
0
5 0 HAL 60°
1 HAL 120°
6 Absolute Single-turn
7 Absolute Multi-turn
8 Reverse Incremental track / Absolute track
12-15 Communication Protocol
1 Hiperface®
Sub Index 2
Description Encoder Configuration
Data Type Unsigned16
Object Class all
Access rw
PDO Mapping No
Default Value
Bit Numbe
r
Description
0 0 Normal direction
1 Reverse direction
Sub Index 3
Description Encoder Virtual Top Z shift
Data Type Unsigned16
Object Class all
Access rw
PDO Mapping No
Default Value 0
This parameter defines the offset between marker Z of the encoder and the virtual marker Z.
The value is given in encoder increments (encoder resolution x 4)
Sub Index 4
Description Encoder Virtual Top Z size
Data Type Unsigned16
Object Class all
Access rw
PDO Mapping No
Default Value 0
This parameter defines the width of the virtual marker Z.
The value is given in encoder increments (encoder resolution x 4).
The virtual marker Z is working with polling technique, the width of the virtual marker Z allows increasing the
marker Z size in order to avoid the missing of the marker Z.
The status of the virtual marker Z can be read by object 0x3127

Table of Contents

Other manuals for Infranor XtrapulsPac

Related product manuals