USER GUIDE
• 9/28 Copyright © 2012 Ingenico
R11 900017771 000 02 All rights reserved
3. Use of the terminal
ADVICE
Before to use the terminal, always check if the roll of paper is present.
3.1. Switching off the terminal
If the battery is empty and the terminal in use is removed from its base, the terminal
automatically shuts off.
It may also be switch by pressing simultaneously
and (yellow key) for one
second.
In order to restart the terminal, press
on the keyboard.
3.2. Reading card
Magnetic stripe card
The card can be read either from bottom to top or from top
to bottom, with the stripe facing the terminal.
Use a regular movement in order to ensure a reliable card reading.
USER GUIDE
• 10/28 Copyright © 2012 Ingenico
R11 900017771 000 02 All rights reserved
Smart card
• Card reader : insert the card horizontally with the chip facing upwards and leave in
position throughout the transaction.
• 2
nd
card reader (Optional)
: is located under terminal trapdoor (on back of the
terminal).
Insert the card up side down chip facing the terminal.
To Next Page
Loading...
Need help?
General
