Ingenico iSMP-Companion - Swiping a card

iSMP-Companion • 18/24 Copyright © 2012 Ingenico
90000 R11 000 04/1120 All rights reserved
5.3. Barcode reader
Barcode is activated with the 2 side keys as shown below.
List of bar codes supported:
Reader type
CMOS Imaging reader
Reads 1D and 2D codes
1D
1D: Codabar, Code 3 of 9, Code 11, Code 32 Pha
r
maceutical
(PARAF), Code 93, Code 128, EAN with Add-On and EAN with
Extended Coupon Code, EAN-13, Interleaved 2 or 5, Matrix 2
of 5, Plessey, GS1DataBar, Straight 2 of 5 IATA, Straight 2 of 5
Industrial, Telepen, Trioptic Code, UCC/EAN-128, UPC and
UPC-A
2D
2D: MicroPDF, Code
block, Aztec, QRCode, Max
i
Code,
DataMatrix, PDF417
5.4. Card insertion
5.4.1. Swiping a card
• Insert the card manually in the driver, magstripe-facing right.
Swipe the card with constant speed, not too slow not too fast, to maximize the
reading and avoid annoying repetitions.