Integration guide iUC150B & iUC160B
900021059 R11 000 04/0416
Copyright© 2015 Ingenico
All rights reserved
36
6_2 Product mounted onstandard EVA plate
Product can be mounted on standard EVA plate. EVA plate is not provided by INGENICO. See the
dimension detailed in the diagram below (all dimensions are in millimeters)
CAUTION
It is required by security regulation that EVA plate must be permanently mounted on the
kiosk (i.e. by soldering) and cannot be removed from the kiosk.
It requires a cut out in the kiosk to the dimensions detailed in the diagram below (all dimensions are in
millimeters).
Fixing must be done by 4 M4x12 welded studs.
View from inside
4 weld stud M4x25
Footprint device
Picture of kiosk front panel preparation
To Next Page
Loading...
