Ingenico iWL220 - Transactions; Performing Sales Transactions

Technical manual _iWL220/250
ICO_MKP_009_GU_EN_V4
20/60
Copyright © 2010 Ingenico
All rights reserved
It can detect cards presence and resist to IK04 impact.
Feature
Description
Conformity with ISO
standard
- ISO/IEC 7816-1, 2, 3 standard
- EMV specifications
Protocol handled
Synchronous and Asynchronous T=0 & T= 1
Clock frequency
4,76MHz (double choice by SW, with PPS management)
Protection
Detection of short-circuit or over-consumption
Detection of accidental removal
Programming voltage Vpp
Not connected
Grip
8 friction contacts (middle chip)
Contact for card presence and removal
Synchronous cards
Separate logical outputs on contacts 4 and 8
Possibility of specific drivers development on request.
Power supply voltage
Vcc 5V or 3V or 1.8V (transition by software)
Read head lifespan
300 000 cycles
2.3.6.2. 2
nd
card reader
On the iWL2xx the second card reader is an optional
device. It is located at the rear side of the terminal.
The card is hidden under a removable trapdoor.
Featu
Description
Conformity with ISO
standard
ISO7816-2
Cards format
ID1 format
Synchronous cards
Don’t manage 4 and 8 contacts
Read head lifespan
Resist to foreign object insertion IP30
Resist to card insertion in a wrong way
Up to 5000 card operations (insertion /withdrawal)