Ingenico iWL250 - Retail Transactions

PAGE 8
Ingenico iWL250-User
Debit Sale • At the Idle Screen, press 1 (Sale).
• Press 2 (Debit).
• Key Sale Amount, and then press Enter.
• Swipe customer card.
• Customer keys PIN number on PIN pad, and the presses Enter.
• Merchant receipt is printed.
• Print Customer Receipt F1 (Yes) or F4 (No).
Debit Refund • At the Idle Screen, press 2 (Return).
• Press 2 (Debit).
• Key Refund Amount, and then press Enter.
• Swipe customer card.
• Customer keys PIN number on PIN pad, and the presses Enter.
• Merchant receipt is printed.
• Print Customer Receipt F1 (Yes) or F4 (No).
Balance Inquiry • At the Idle Screen, press 8 (Balance Inquiry).
• Press 2 (Debit).
• Swipe customer card.
• Customer keys PIN number on PIN pad, and the presses Enter.
• Merchant receipt is printed.
• Print Customer Receipt F1 (Yes) or F4 (No).
Enable Tips after transactions • At the Idle Screen, press #.
• Enter manager password, and then press Enter.
• Press 5 (Setup Menu).
• Press 4 (Trans Options).
• Press 5 (Tip Options).
• Press 5 (TipAfterSale).
• Press F1 (On).
• Press Cancel until Idle Screen is displayed.
Tip Adjust • At the Idle Screen, press 7 (Adjust).
• Press 1 (All).
• Locate transaction (using arrow keys), and then press F4 (Select).
• Key Tip Amount, and then press Enter.
• Press F1 (Accept).
• Merchant receipt is printed.
• Press F1 (Yes) to adjust another transaction or press F4 (No).
Open Tab • At the Idle Screen, press 6 (Tab).
• Press 1 (Open).
• Press F1 to accept default tab amount, or press F4 to change amount.
• Swipe customer card.
• Merchant receipt is printed.
• Print Customer Receipt F1 (Yes) or F4 (No).
Close Tab • At the Idle Screen, press 6 (Tab).
• Press 2 (Close).
• Press 1 (All).
• Locate transaction (using arrow keys), and then press F4 (Select).
• Press F1 to use the same card, or press F4 to use dierent card.
• Press F1 (Accept).
• Merchant receipt is printed.
• Print Customer Receipt F1 (Yes) or F4 (No).
Debit Transactions
Restaurant Functions