To Next PageTo Next PageWhat to do if the Ingersoll-Rand 2000 valves are leaky, broken, carbonized or loose?
If the valves of your Ingersoll-Rand Air Compressor are leaky, broken, carbonized, or loose, inspect the valves. Clean or replace them as required. Install a Valve/Gasket Step Saver Kit.
What to do if the Ingersoll-Rand Air Compressor drive belts are too tight or misaligned?
If the drive belts on your Ingersoll-Rand Air Compressor are too tight or misaligned, adjust the belts to the proper tension and alignment.
What to do if the Ingersoll-Rand 2000 Air Compressor has poor power regulation (unbalanced line)?
If your Ingersoll-Rand Air Compressor has poor power regulation (unbalanced line), contact your power company.
What to do if the Ingersoll-Rand 2000 Air Compressor has improper starter overload heaters?
If your Ingersoll-Rand Air Compressor has improper starter overload heaters, install proper starter overload heaters. Contact an electrician for assistance.
What to do if the Ingersoll-Rand 2000 has poor contact on motor terminals or starter connections?
If there is poor contact on the motor terminals or starter connections of your Ingersoll-Rand Air Compressor, ensure good contact on the motor terminals or starter connections.
What to do if the Ingersoll-Rand 2000 lubricant level is too low?
If the lubricant level in your Ingersoll-Rand Air Compressor is too low, add lubricant to the crankcase until it reaches the proper level.
What to do if the Ingersoll-Rand 2000 has improper line voltage?
If your Ingersoll-Rand Air Compressor has improper line voltage, check the line voltage and upgrade the lines as required. Contact an electrician for assistance.
What to do if the Ingersoll-Rand 2000 Air Compressor pressure switch differential is too narrow?
To address a pressure switch differential that is too narrow on your Ingersoll-Rand Air Compressor, adjust the pressure switch to increase the differential, if a differential adjustment is provided. If differential adjustment is desired, install a pressure switch with a differential adjustment feature.
What to do if the Ingersoll-Rand 2000 is experiencing extremely light duty cycles?
If your Ingersoll-Rand Air Compressor is experiencing extremely light duty cycles, run the compressor for longer duty cycles.
What to do if the Ingersoll-Rand Air Compressor has inadequate ventilation around beltwheel?
If there is inadequate ventilation around the beltwheel of your Ingersoll-Rand Air Compressor, relocate the compressor to allow for better air flow.
General| Brand | Ingersoll-Rand |
|---|---|
| Model | 2000 |
| Category | Air Compressor |
| Language | English |
The Ingersoll Rand Nirvana Cycling refrigerated air dryer removes moisture, oil vapor, and other contaminants from compressed air.
The Company warrants that the equipment manufactured by it will be free of defects in material and workmanship for a period of twelve months.
Details the nomenclature of the refrigerated dryer, including model, condenser type, and power ratings.
Guidance on inspecting the unit upon receipt and safely unpacking and handling the dryer.
Essential safety precautions and warnings for operating and maintaining the air dryer.
Defines Warning, Caution, and Notice to communicate hazard severity and company policy.
Explains how the dryer removes moisture by cooling air to between 36-40°F and lists the major systems.
Describes the components of the dryer that come into contact with the compressed air.
Explains how condensate is discharged using a zero-air-loss drain with a capacitive sensor.
Details the closed-loop system handling R-404A refrigerant, including compressor, condenser, and filter dryer.
Describes the circulation of thermal mass fluid in a closed pump loop system for cooling.
Details the Microprocessor Control, its features, and access levels (CUSTOMER, TECHNICIAN, FACTORY).
Summarizes the keypad functions and displays of the Microprocessor Control.
Lists and describes the system parameters that can be accessed and displayed by the user.
Explains user-adjustable set points and lists parameters like Chiller Off Temperature.
Provides step-by-step instructions for adjusting set points in CUSTOMER MODE using the control panel.
Details various alarms detected by the Microprocessor Control and their functions.
Describes the three available start modes: Manual, Auto Restart, and Remote Automatic.
Provides guidelines for selecting an appropriate location and mounting the dryer, considering ambient temperature and clearance.
Details piping arrangements, valve functions, and recommendations for connecting the dryer.
Recommends pre-filters and post-filters for protecting the dryer and ensuring performance.
Explains how to make electrical connections, including warnings about wiring.
Provides essential notices and a warning regarding initial start-up procedures.
Outlines the step-by-step sequence for starting the dryer after power is applied.
Guide to routine maintenance tasks required for the air dryer to ensure optimal performance.
Recommends regular inspection and cleaning of the condenser, including optional ambient air filters.
Provides maintenance recommendations for the condensate discharge system, including service unit replacement.
Access to advanced parameters for technicians to adjust settings and troubleshoot the dryer.
Provides a warning and keystrokes to enter Technician Mode for parameter adjustment.
Explains how to access and view the list of the most recent 20 alarm conditions for troubleshooting.
Guide to identifying and resolving common problems encountered with the air dryer.
Introduces the troubleshooting guide designed to help identify and correct dryer malfunctions.
A guide listing common problems, their symptoms, possible causes, and corrective actions.
Presents the wiring diagram for the NVC2000-2400 Air and Watercooled models.
Shows the general arrangement of the NVC2000-2400 dryer with different views and dimensions.
Lists replacement parts for NVC2000/2400 models, including part numbers and recommended quantities.
Provides engineering specifications for air and water-cooled condensers, including ratings and dimensions.
