InHand IR611-S - Installation Guide; Device Installation and Precautions

4
(Red)
(Green)
(Yellow)
(Red)
On
Off
Off
Off
Powered On
On
Blinking
On
Off
Powered on succeed
On
Blinking
On
Off
Dialing
On
Blinking
Off
Off
Dialing succeed
On
Blinking
Blinking
Blinking
Upgrading
On
Blinking
On
Blinking
Reset Succeed
Signal status LED and description:
Green LED 1
Green LED 2
Green LED 3
Description
Off
Off
Off
No signal detected
On
Off
Off
Signal strength 1-9 (Signal strength is weak,
please check antenna and the signal strength of
current location)
On
On
Off
Signal strength 10-19 (signal strength is basically
normal, and equipment can be used under
normal conditions)
On
On
On
Signal strength 20-31 (signal strong)
WLAN LED and description:
WLAN Green LED
Description
On
Enable WLAN
Off
Disable WLAN
Blinking
Reset Succeed
II. Installation
2.1 Installation of Device
Precautions:
Please be sure there is 3G/4G network coverage and there is no shield on site. 220V AC or
9~26VDC shall be provided on site. First installation shall be done under direction of the
engineer recognized by InHand Networks.
 1 PC
OS: Windows 2000, Windows NT, Windows XP, Windows 7
CPU: Above PII 233
Memory: Above 32M
Hard disk: Above 6.4G