InHand IR611-S - Status LED Indicators; IR611-S and IR615-S Series LEDs

3
IR6XX-S series has a variety of panel appearances, but all of the installation methods are the
same. The specific panel condition should be subject to the real object.
1. 4 Introductions to Status LED
1.4.1 Applicable to IR611-S series
POWER
STATUS
WARN
ERROR
LINK
Description
(Red)
(Green)
(Yellow)
(Red)
(Yellow)
On
Off
Off
Off
On
Powered On
On
Blinking
On
Off
Blinking
Powered on succeed
On
Blinking
On
Off
Blinking
Dialing
On
Blinking
Off
Off
Blinking
Dialing succeed
On
Blinking
Blinking
Blinking
Blinking
Upgrading
On
Blinking
On
Blinking
On
Reset Succeed
Signal status LED and description:
Green LED 1
Green LED 2
Green LED 3
Description
Off
Off
Off
No signal detected
On
Off
Off
Signal strength 1-9 (Signal strength is weak,
please check antenna and the signal strength of
current location)
On
On
Off
Signal strength 10-19 (signal strength is basically
normal, and equipment can be used under
normal conditions)
On
On
On
Signal strength 20-31 (signal strong)
WLAN LED and description:
WLAN Green LED
Description
On
Enable WLAN
Off
Disable WLAN
Blinking
Reset Succeed
1.4.2 Applicable to IR615-S series
POWER
STATUS
WARN
ERROR
Description