InHand IR611-S - LAN Parameters and WLAN Mode Switching

19
Here MAC address, IP address and other basic information can be modified and multiple IP
access to LAN is supported.
Click the “Network>>LAN” menu in the navigation tree to enter the configuration interface.
Table3-2-4Parameters of LAN
2 LAN
Function description: LAN is the gateway address of router.
Parameters
Description
Default
MAC Address
MAC Address of the device LAN
00:18:05:08:15:77 (provided by
InHand Networks), provided
for device manufacturer
IP Address
Set IP address of LAN
192.168.2.1 (New IP address of
LAN needs to be entered after
modification to enter the
configuration page)
Subnet mask
Set subnet mask of LAN
255. 255. 255. 0
MTU
Max. transmission unit, optional
default/manual configuration
default (1500)
LAN Mode
Select transmit rate: Optional Auto
Negotiation/100M Full Duplex/100M
Half Duplex/10M Full Duplex/10M
Half-Duplex
Auto Negotiation
Multiple IP support (at most 8 additional IP addresses can be set)
IP Address
Set additional IP address of LAN
N/A
Subnet mask
Set subnet mask
N/A
Description
For recording significance of additional
IP address (not support Chinese
characters)
N/A
3.2.5 Switch of WLAN Mode
WLAN refers to Wireless Local Area Network. WLAN has two types of interfaces, the Access point
and the Client.
Click the “Network>>Switch of WLAN Mode” menu in the navigation tree to switch WLAN mode.
3.2.6 WLAN Client (AP Mode)
When working in AP mode, the device WLAN will provide network access point for other wireless