InHand IR611-S - Basic Setup and System Time

8
3.1.1 Basic Setup
Here, WEB configuration interface language can be set; name of mainframe of router can be
customized.
From the navigation tree, select System >> Basic Setup, then enter the “Basic Setup” page.
Table 3-1-1 Basic Setup Parameters
Basic settings
Function description: Select display language of the router configuration interface and set
personalized name.
Parameters
Description
Default
Language
Configure language of WEB configuration interface
Chinese
Host Name
Set a name for the host or device connected to the router
for viewing.
Router
3.1.2 System Time
To ensure the coordination between this device and other devices, user is required to set the
system time in an accurate way since this function is used to configure and check system time as
well as system timezone. System time is used to configure and view system time and system time
zone. It aims to achieve time synchronization of all devices equipped with a clock on network
so as to provide multiple applications based on synced time.
From the navigation tree, select System >> Time, then enter the “Time” webpage, as shown
below. Click <Sync Time> to synchronize the time of the gateway with the system time of the
host.
Table 3-1-2 Parameters of System Time
System Time
Function description: Set local timezone and automatic updating time of NTP.
Parameters
Description
Default
Time of
Router
Display present time of router
8:00:00 AM, 12/12/2015
PC Time
Display present time of PC
Present time
Timezone
Set timezone of router
Custom
Custom TZ
String
Set TZ string of router
CST-8
Auto update
Select whether to automatically update time,
Disable