InHand IR611-S - Network Configuration; Dialup and Cellular Connections

14
3. 2 Network
Network settings include Dialup/Cellular, WAN (only for IR615-S series), Link Backup, LAN, WLAN
Mode Switch, WLAN, DNS, DDNS and Static Routes.
3.2.1 Dialup/Cellular Connection
SIM card dial out through dial access to achieve the wireless network connection function of
router.
Click the “Network>>Dial Interface” menu in the navigation tree to enter the “Dial Interface”.
Table3-2-1-1Parameters of Dialup/Cellular
Dialup/Cellular Connection
Function description: Configure parameters of PPP dialup. Generally, users only need to set
basic configuration instead of advanced options.
Parameters
Description
Default
Enable
Enable PPP dialup.
Enable
Time Schedule
Set time schedule
ALL
Shared connection
(NAT)
Enable—Local device connected to Router
can access to the Internet via Router.
Disable—Local device connected to Router
cannot access to the Internet via Router.
Enable
Default Route
Enable default route
Enable
Network Provider (ISP)
For selecting network provider providing
service at present
Custom
APN (inapplicable to
CDMA2000 series)
Mobile carrier provides relevant parameters
(subject to local carrier)
cmnet/uninet
Dialing Number
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“*99#”“*99***1#”(
China Mobile,
China
Unicom)#777(China
Telecom)
Username
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs” (China
Mobile, China
Unicom)
CARD(China
Telecom)
Password
Relevant dialing parameters provided be
mobile carriers (subject to local carrier)
“gprs” (China
Mobile, China
Unicom)