InHand IR611-S - Page 66

60
The config. is imported.
7 System Management Command
7. 1 Reboot
[Command] Reboot
[Function] System restarts.
[View] Super user view and configuration view
[Parameter] No
[Example]
Enter in super user view:
reboot
System restarts.
7. 2 Enable username
[Command] Enable password [<name>]
[Function] Modify the username of super user.
[View] Configure view.
[Parameter]
<name> new super user username
[Example]
Enter in configured view:
enable username admin
The username of super user is changed to admin.
7. 3 Enable password
[Command] Enable password [<password>]
[Function] Modify the password of super user.
[View] Configure view.
[Parameter]
<password> new super user password
[Example]
 Enter in configured view:
enable password