Inhep Digital Security IDS 404 - LOCATION 21 Hardware Reset Switch Enable;Disable; LOCATIONS 22-56 Programmable Output Controls

IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02 27
IDS404 INSTALLER MANUAL
91NOITACOLemiTerotseR&liaFCA
eulaV yaleD eulaV yaleD
0
.nim1
8
.nim9
1
)tluafeD(.nim2
9
.nim01
2
.nim3
01
.nim11
3
.nim4
11
.nim21
4
.nim5
21
.nim31
5
.nim6
31
.nim41
6
.nim7
41
.nim51
7
.nim8
51
.nim61
If the AC power should fail, the panel will wait for this period of time
before reporting the mains failure to the base station or logging the
event to the event log. If the AC power is restored after the time out
period has ended the same time out period will apply before the
restoral event is reported and logged.
If the AC power is restored during the delay period neither the power
failure nor the power restoral will be reported or logged to the event log.
This delay eliminates unnecessary reporting if the AC power to the
panel is accidentally removed for a short period (provided the back up
battery is in good condition, short AC power failures will not affect the
functioning of the alarm system). Select the appropriate value from the
table above.
02NOITACOLyaleDyrtnEyramirP
eulaV yaleD eulaV yaleD
0
.ces52.0
8
.nim4
1
.ces01
9
.nim5
2
.ces02
01
.nim01
3
)tluafeD(.ces03
11
.nim51
4
.ces54
21
.nim81
5
.nim1
31
.nim12
6
.nim2
41
.nim12
7
.nim3
51
.nim12