3 2 IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02
IDS404 INSTALLER MANUAL
Figure 7: Fire detect output sequence
NOTE:
Since multiple conditions may be programmed to a single output. It is
essential to ensure that no unwanted conditions are assigned to the
same output.
75NOITACOLsnoitpOgnillaiD/snoitpOrebmuNenohP
Provision is made for the panel to dial different phone numbers
(locations 68-83 for primary number and 84-99 for the secondary
number). The panel can be programmed to report to these phone
numbers as follows:
! Reporting codes can be programmed to report to a single central
station (single reporting).
! Report independently to 2 central stations (dual reporting).
! The primary and secondary numbers may be joined to provide for
a single number up to 32 digits.
! The numbers can be dialled using either tone or pulse dialling.
Enter the appropriate value from the following to setup the required
phone number options.
eulaV nioJ edoMlaiD
0oNgnitropeRelgniS-esluP
gnitropeR :
!
litnusrebmunenohpeletyradnocesdnayramirplaidesluP
stpmettaforebmunehtrofrolufsseccussinoitacinummoc
.171noitacolotnidemmargorp
To Next Page
Loading...