Inhep Digital Security IDS 404 - LOCATIONS 172-175 Secondary Communicator Account Code; LOCATION 176 Secondary Communicator Format

IDS404 INSTALLER MANUAL NO. 700-277-02A ISSUED SEPT 2004 VER 1.02 49
IDS404 INSTALLER MANUAL
071NOITACOLMLT/neriselbaneerawdraH
eulaV
eniLenohpeleT
gnirotinoM
repmaTneriS
gnirotinoM
repmaTxoB
gnirotinoM
0
tluafeD
# # #
1
$
#
#
2
#
$
#
3
$$
#
4
##
$
5
$
#
$
6
#
$$
7
$$$
$
delbanE
#
delbasiD
This location allows the permanent enabling/ disabling of telephone
line, siren tamper and box tamper monitoring.
171NOITACOL)4=tluafeD(stpmettAlaiD
Determines the maximum number of dial attempts the panel will make
to contact the base station.
NOTE:
Entering [0] into this location will disable the dialler.
571-271SNOITACOLedoCtnuoccArotacinummoCyradnoceS
This account code is used if the panel is communicating to two base
stations and will be transmitted to the secondary phone number. See
Locations 60-63 for information regarding the programming of these
locations.
671NOITACOL )0=tluafeD(tamroFrotacinummoCyradnoceS
This communicator format is used if the panel is communicating to two
base stations and will be transmitted to the secondary phone number.
See Location 64 and the subsequent notes for information regarding
the programming of this location.