Inhep Digital Security IDS 800 - 13.4 Program Location Summary

16 IDS800 INSTALLER MANUAL NO. 700-175-02N ISSUED JUL 2003 VER 1.45
IDS800 INSTALLER MANUAL
location value, press the [#] key. The READY indicator will
continue flashing and the AWAY indicator will extinguish.
9. If the data value has been changed, the buzzer will give a long
beep indicating that a valid entry has been stored.
10. Repeat steps 5-8 until all necessary locations have been
programmed.
11. To exit from the programming mode press the [#] key.
The READY indicator will stop flashing to indicate that the program
mode has been exited.
13.4 Program Location Summary
Following is a detailed description of the functioning of each location
and its options.
0NOITACO
L
edocresuretsamrolenapehtfognitluafeD
eulaV noitcA
0
tluafeD
ehtninwohssaseulavtluafedyrotcafehtotsnoitacolllasteseR
oslalliwsedocresullA.tsilgnimmargorpehtninmulocTLUAFED
.4321emoceblliwedocresuretsamehtdnadetluafedeb
1ehtgnitluafedtuohtiw4321otedocresuretsamehttluafedlliW
-nuniamerlliwnoitamrofnirehtollA.sedocresuehtforedniamer
.deretla
2rehtotamrofrotacinummocafI.0otsedocgnitroperllateserlliW
-erebotdeensedocgnitropereht,desusiDItcatnoCnaht
r
oirp0otsedocgnitroperllatluafedotelbasivdasitI.demmargorp
.sedocehtgnimmargorperot