30 IDS800 INSTALLER MANUAL NO. 700-175-02N ISSUED JUL 2003 VER 1.45
IDS800 INSTALLER MANUAL
Figure 7: Fire Detect Output Sequence
NOTE:
Since multiple conditions may be programmed to a single output It is
essential to ensure that no unwanted conditions are assigned to the
same output.
14NOITACO
snoitpOgnillaiD/snoitpOrebmuNenohP
Provision is made for the panel to dial different phone numbers
(locations 48-63 for primary number and 64-79 for the secondary
number). The panel can be programmed to report to these phone
numbers as follows:
Reporting codes can be programmed to report to a single central
station (single reporting).
Report independently to 2 central stations (dual reporting).
The primary and secondary numbers may be joined to provide for
a single number up to 32 digits.
The numbers can be dialled using either tone or pulse dialling.
Enter the appropriate value from the following to setup the required
phone number options.
eulaV nioJ edoMlaiD
0oNgnitropeRelgniS-esluP
gnitrope
:
litnusrebmunenohpeletyradnocesdnayramirplaidesluP
stpmettaforebmunehtrofrolufsseccussinoitacinummoc
.521noitacolotnidemmargorp
To Next Page
Loading...