7
These locations contain the secondary telephone number that may be
up to sixteen digits long. The same procedures apply as for the
Primary Telephone Number.
Communicator Reporting Codes (Locations 80-116)
With the exception of Contact ID and Sescoa Superfast, all other
communications formats are 4 x 2 reporting formats i.e. a 4 digit
account code will be reported with a 2 digit reporting code. It will be
noted that some reporting functions require that both digits of the
reporting code be programmed while others only require a single digit
to be programmed. Reporting codes with only one digit will have the
second digit added automatically by the panel. An explanation is
provided under each reporting code. It is however important to note that
wherever space is provided for the programming of 2 reporting digits
i.e. Locations 86 and 87 for zone 1 reporting code BOTH DIGITS
MUST BE PROGRAMMED
.
NOTE:
To disable any of the reporting codes program a [0] into the
locations for both digit 1 and digit 2.
All reporting codes that require a “0” to be reported must be
programmed as a [10] i.e. An “A” will be reported in the place of
the “0” as per the hexadecimal values below.
eulaVlaciremu
To Next Page
Loading...