38 IDS800 INSTALLER MANUAL NO. 700-175-02N ISSUED JUL 2003 VER 1.45
IDS800 INSTALLER MANUAL
The panel would be programmed as follows:
noitacoL eulaV noitpircseD
847 rebmunenohpfotigidts1-
9401rebmunenohpfotigiddn2-
055 rebmunenohpfotigiddr3-
151 rebmunenohpfotigidht4-
253 rebmunenohpfotigidht5-
357 rebmunenohpfotigidht6-
453 rebmunenohpfotigidht7-
5551yaleddnoces4-
6551yaleddnoces4-
756 stigidgnitroperforebmun-
850 rebmunenohpetanimret-
3401edoctnuoccafotigidts1-
441 edoctnuoccafotigiddn2-
542 edoctnuoccafotigiddr3-
643 edoctnuoccafotigidht4-
6801edocgnitroper1enozfotigidts1-
781 edocgnitroper1enozfotigiddn2-
8801edocgnitroper2enozfotigidts1-
982 edocgnitroper2enozfotigiddn2-
After a successful communication attempt caused by a zone 1
violation the pager will display 012301
NOTES ON DOMESTIC REPORTING:
Domestic reporting will dial both phone numbers as programmed into
locations 48-63 and 64-79. The data to be reported will be transmitted
3 times immediately after the phone number is dialled. This format
provides for a simple form of easily identifiable remote alarm which
may be reported to an office, mobile phone etc.
When using either of the blind formats (i.e. Domestic Reporting or
Pager Format) the number will be dialled and the data will be
transmitted the number of times as programmed into the number of
dial attempts (location 125).
To Next Page