Inhep Digital Security IDS 800 - Reporting Codes and Event Handling

IDS800 INSTALLER MANUAL NO. 700-175-02N ISSUED JUL 2003 VER 1.45 35
IDS800 INSTALLER MANUAL
Table 8: Standard Contact ID reporting codes
noitpircseD sedoC noitircseD sedoC
resuybesolC1043ssapyBenoZ0751
mraotuaybesolC3043nwodtuhSenoZ3751
daolnwodybesolC7043larotserenoZ0313
hctiws-yekhtiwesolC9043enozybrepmaT7311
resuybnepO1041repmaTdapyeK7311
daolnwodybnepO7041tuokcoldapyeK7311
hctiws-yekhtiwnepO9041enozcinaP0211
lecnaC6041cinaP0211
noitaloivyralgruB0311cinapdapyeK0211
noitaloivretemireP1311liafCA1031
noitaloivroiretnI2311larotserCA1033
noitaloiv)efaS(ruoH423311yrettabwoL2031
noitaloivtixe/yrtnE4311tropertseT2061
noitaloivthgin/yaD5311erifdapyeK0111
noitaloivroodtuO6311eriF0111
noitaloivrepmaT7311sseruD1211
noitaloivmralaraeN8311lacidemdapyeK0011
The generic Contact ID reporting code for an alarm caused by a zone
violation is 1130, corresponding to a “BURGLARY” description. If you
wish particular zone violations to be reported with a description other
than BURGLARY an option may be chosen from Table 9 overleaf. The
first digit of the reporting code relevant to that zone must be changed
to the value as indicated in the table.