APRIL 2020 • REVISION 4.0 INSTRUCTION MANUAL
15
The ProXcide™ is designed to be operated by a single person. Secured on six fully steering castors
with a 360 degree handle the ProXcide™ is very easy to turn left or right. The ProXcide™ weighs
around 113kg (drained of fluid) so care must be taken when pushing the ProXcide™ especially up
gradients. Maintain an upright posture and avoid lowering your shoulders to push the machine as
this can put undue pressure on the lower back area.
Never attempt to lift the ProXcide™. Take particular care when manoeuvring the equipment
outside. Avoid any drops like steps, kerbs and loading bays - do not attempt to wheel the ProXcide™
down steps.
Take care when disengaging the process monitor, so as not to damage it. The process monitor is
designed to aid stability. You should lift the process monitor by the handles provided around the
touchscreen and take care when lifting on and o the main unit. Be careful not to trap toes when
placing the process monitor on the floor.
Section 4: Before using the ProXcide
™
BAD POSTURE
GOOD POSTURE
4.1 Manoeuvring the ProXcide™ equipment
To Next Page
Loading...