50
www.inivos.com
INSTRUCTION MANUAL REVISION 4.0 • APRIL 2020
Each time a ProXcide™ process is completed, a log file is created containing: the System Number;
Process ID; Process Location; Process Start Time; Process Authorisation and Duration. The report
also summarises the success or failure of each phase of the process, and the duration of each phase.
The report shows clearly whether a decontamination process was successful or not.
The ProXcide™ system can send these reports directly to an email address using its internal mobile
broadband connection. The service is dependent on a mobile broadband signal. If a 3G signal is not
available, the ProXcide™ will store reports and send them the next time it is plugged in and a signal is
available.
If you would like to enable this service, please contact Inivos using the contact details provided.
A typical decontamination process report showing that
decontamination was successful.
5.10 ProXcide™ process log
To Next Page
Loading...