Inner Range Integriti Prisma Keypad User Manual

11
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
LOGON.
- ,
Enter your secret PIN Code using the digit keys,
then press the <OK> key. Each digit pressed will
be displayed as an asterisk (*) character.
If you make an error while entering your PIN code,
press <Delete> to delete the last character entered,
or the <Cancel> or <END> key to start again.
If there are no messages to be acknowledged, the
Display may first greet and identify you.
Note: The greeting may be disabled if required.
If there is a message to be acknowledged, refer to
“Acknowledge an Alarm”.
The Area Control screen is now displayed, with the
first Area (or Area List) that you are allowed to
control highlighted, and a text prompt for the relevant
action on that Area, shown at the bottom of the
screen. i.e. “OK=On”
When your operations are complete, you should
Logoff the Terminal by pressing the <END> key.
If the <END> key is not used, the Terminal will log
off automatically within a short time.
Logging on is the first step performed in many operations.
User code entry
Enter your PIN
********
Cancel OK=Accept Delete
Area Control
Admin
Sales Counter
Warehouse
Board Room
Training Room
Menu OK=On Area Lists
Good Morning
Robyn
LOGON

Inner Range Integriti Prisma Keypad Specifications

General

Brand	Inner Range
Model	Integriti Prisma Keypad
Category	Security System
Language	English