Inner Range Integriti Prisma Keypad User Manual

18
Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
A message may be displayed on the Terminal
indicating which Area the Event has occurred in.
Logon to the Terminal as described before.
(PIN code + <OK>)
The display will show the specific details of any
Events in this Area that have not been
acknowledged.
Select an Event using the SCROLL WHEEL, note
the details, then press:
- The <OK> FUNCTION key to acknowledge
the selected message, or
- The <Accept All> FUNCTION key to
acknowledge all messages displayed, or
- The <Later> FUNCTION key to postpone
acknowledgement of the alarm.
If there are other Areas that have had an event, the
next Area event messages will be displayed until
all messages have been acknowledged or
postponed.
The display will then show the Area Status display
to allow you to continue with your operation.
e.g. Turn the Area OFF.
Alarm or Event messages must be acknowledged by a User with the appropriate authority.
These messages provide precise information of the type of event, the Area it has occurred
in, and the Zone Input or System Input that caused the alarm.
Acknowledge an Event or Alarm.
Had Event in Kitchen
Kitchen had an
Event
- ,
Events in Kitchen
Heat Rise Detector
had Alarm
Accept All OK=Ack Later

Inner Range Integriti Prisma Keypad Specifications

General

Brand	Inner Range
Model	Integriti Prisma Keypad
Category	Security System
Language	English