8
**Note: For information regarding stores that carry replacement needles for your ITUT-300 unit, please
contact us by sending an email to: support@ithomeproducts.com or call toll-free 1-877-483-2497.
Listening to a Record
1. Connect the AC power cord to AC outlet.
2. Plug the 2 ends of the LINE OUT Cable into the auxiliary input (Aux) on your TV, home
entertainment receiver or other music systems. Be sure that the red RCA Cable is inserted into the
red jack and the white RCA Cable is inserted into the white jack.
3. Press the POWER button on the unit. Also turn the power on the unit that you connected with this
turntable.
4. Put a record onto the turntable. When playing a 45rpm record, remember to use the adapter
packed in the polybag along with the manual.
5. Select player speed (33-1/3, 45 OR 78 rpm) according to the record you are playing.
6. Remove the tone arm-rest holder, lift the que-lever and move the tone arm gently to the desired
position over the record. Lower the que-lever slowly and record will start to play.
7. Adjust the volume on your auxiliary source to control the volume of the music.
8. Press the PLAY button to continue playing.
9. When the music playing is finished and tone-arm reaches the end of the record, the tone-arm will
return back to the arm-rest automatically. Or you can press the eject button when playing the record
and the tone arm will lift up from the record and automatically return to the arm-rest.
10. Remember to unplug the plug when not playing the unit for extended periods of time.
To Next Page
Loading...
