Parameter Description MD280/MD280N User Manual
- 130 -
Setup
value
Function Description
frequency source Y) via this terminal.
When the frequency source selection
(F0-07) is set to 4, it performs switching
between auxiliary frequency source X and
(main frequency X plus auxiliary
frequency source Y) via this terminal.
Caution:
1:
The source keyboard command switching of DI terminal has priority over
the source terminal command switching of DI terminal.When the keyboard
command source switching or terminal command source switching is valid,
the MF.K function is invalid for control panel command channel and remote
command channel switching.
2: The second motor paramerter is set by group FC function code. V/F
curve is straight by default, speed-up/speed-down time is determined by
function code of FC-09.
efesotomasyon.com
To Next Page
Loading...
