- 226 -
Communicaton overtime Factory
default value
0.0 s
FA-04
Setup range
0.0 s˄Invalid˅ˈ0.1 to 60.0s
When the inverter can not receive the communication signal,the inverter will
report the communication overtime fault˄Err16˅.
When the function set to 0.0 s, the communication overtime parameter is
invalid.When the function set to 0.0 s, the communication overtime parameter
is invalid.
At normal circumstances, it will be set as invalid. If in the continuous
communication system, set the second parameter, you can monitor the
communication status.
efesotomasyon.com
To Next Page
Loading...
