1 Safety Instructions
- 4 -
1
Storage and Transportation
◆
Store this equipment based on the storage and transportation requirements on humidity and tem-
perature.
◆
Avoid transporting the equipment in environment such as water splashing, rain, direct sunlight, high
voltage, strong magnetic eld, and strong vibration.
◆
Avoid storing the product for more than 3 months, long-term storage shall require stricter protection
and necessary inspections..
◆
Pack the product strictly before you transport. Use a sealed box for long-distance transportation.
◆
Never transport this product with products or materials that harm or have negative impacts on this
product.
◆
Use professional loading and unloading equipment to carry large-scale or heavy products.
◆
When carry this equipment with bear hand, hold the product casing rmly with care preventing from
parts falling, otherwise, it may result in personal jury or equipment damages.
◆
Handle the products with care, mind your steps, otherwise, it may result in personal juries or equip-
ment damages.
◆
Never stand or stay below the equipment when the equipment is lifted by hoisting equipment.
Installation
◆
Read and comply with the safety instructions before performing installation.
◆
Do not modify this product.
◆
Do not rotate the product components or the xed bolts and red marked bolts on product compo-
nents.
◆
Do not install this product in places where there is strong electric eld or strong magnetic eld.
◆
When this product is installed in a cabinet or terminal device, the cabinet or terminal device must be
equipped with protective shell. The proof class must comply with relevant IEC standards and local
regulations.
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspection or
parts replacement.
◆
The installation, wiring, maintenance, inspection and parts replacement are intended to be performed
by professional personnel only.
◆
Installation personnel must be familiar with product installation requirements and relevant technical
materials.
◆
If you need to install transformer or other strong electromagnetic interference equipment, install
shielding device at the same time to avoid product malfunction.
To Next Page
Loading...