1 Safety Instructions
- 6 -
1
◆
Prevent metal or other objects from falling into the device during operation, failure to comply may
result in equipment damage.
◆
Never use contactors to start or stop the equipment. Failure to comply may result in damage to the
equipment!
Maintenance
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspection or
parts replacement.
◆
Never perform maintenance at power-on. Failure to comply may result in electric shock.
◆
Before maintenance, wait at least 10 minutes after power-off so that residual voltage can discharge
safely.
◆
Following the equipment repair and maintenance requirements to perform routine and periodical in-
spection and maintenance, and keep a maintenance record.
Repair
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspection or
parts replacement.
◆
Never perform any inspection or maintenance operations at power-on. Failure to comply may result
in electric shock.
◆
Before inspection or maintenance, wait at least 10 minutes so that residual voltage can discharge
safely.
◆
Follow the terms dened in the warranty agreement to repair the product.
◆
When the equipment has a fault or is damaged, follow the instructions of the professionals to perform
troubleshooting or maintenance, and keep a maintenance record.
◆
Following the quick-wear parts instructions to replace the damaged parts.
◆
Do not continue to use the damaged equipment. Failure to comply may result in worse damages.
◆
Following the equipment repair and maintenance requirements to perform routine and periodical in-
spection and maintenance, and keep a maintenance record.
Disposal
◆
Following the local regulations or standards to dispose the retired equipment or products. Failure to
comply may result in property damage or even death.
◆
Following the industry waste disposal standards to recycle the scrapped equipment to avoid environ-
mental pollution.
To Next Page
Loading...
Need help?
General