6 Parameter Description
-
250
-
Function
Code
Name Setting Range Default Unit Property
Fd-07 HCB: JP1 input
0: Invalid
1: Elevator lock
signal
2: Fire emergency
signal
forbidden
signal
6 Door close button
signal
signal
1 -
★
Fd-08 HCB: JP2 input 2 -
★
Fd-07 and Fd-08 are used to set the input parameters of pins 2 and 3 of JP1 and JP2
Function
Code
Name Setting Range Default Unit Property
Fd-09 HCB: JP1 output
0: Invalid
1: Up arrival indicator
2: Down arrival indicator
3: Fault output
4: Non-door zone stop
output
5: Non-service state
6: Door close button
indicator output
1 -
★
Fd-10 HCB: JP2 output 2 -
★
Fd-09 and Fd-10 are used to set the output parameters of pins 1 and 4 of JP1 and JP2
To Next Page
Loading...