‑1‑
Preface
Introduction
The SV660F series high performance AC servo drive provides a power range from 0.05
kW to 7.5 kW. It supports Profinet communication protocol and carries Ethernet
communication interfaces to work with the host controller for a networked operation
of multiple servo drives.
The SV660N series servo drive supports stiffness level setting, inertia auto‑tuning and
vibration suppression to simplify the operation process. It allows a quiet and stable
operation through cooperating with the MS1 series medium‑to‑small inertia high‑
response servo motors configured with a 23‑bit multi‑turn absolute encoder.
It is suitable for lithium battery PACK, printing and packaging, logistics, automobile
manufacturing, tobacco and other industries to achieve fast and accurate
collaborative control.
This guide Introduces faults and fault levels, the troubleshooting process, warning
codes and fault codes.
More documents
Name
Data Code
Description
SV660F Series Servo Drive
Selection Guide
19011667
Provides instructions on product
selection, including the list of
supporting components, technical data
on the drive and motor, and the
selection guide of cables.
SV660F Series Servo Drive
Hardware Guide
19011666
Presents electrical design guidance of
the equipment, description of terminals,
required certificates and standards and
solutions to common EMC problems.
SV660F Series Servo Drive
Commissioning Guide
19011668
Presents servo commissioning,
parameter descriptions, including the
operating panel, commissioning
software, commissioning procedure and
a parameter list.
SV660F Series Servo Drive
Communication Guide
19011670
Presents functions and parameters of
the servo drive, including Profinet
communication configuration,
parameter description, and
communication application cases.
SV660F Series Servo Drive
Function Guide
19011669
Presents functions and parameters,
including function overview, basic servo
functions, adjustment and parameter
list.
SV660F Series Servo Drive
installation Guide
19012103
Presents installation of the servo drive,
including installation steps, mechanical
installation, and electrical installation.
To Next Page
Loading...
Need help?
General
