RECEIVER CONTROLS & OPERATIONS
1.Press the FM/AM button on the front panel or remote control
to
2.Select the station you want to store in memory using the me-
thods described above.
3.Press the MEMORY button on the remote, "MEMORY" blinks
in the display. While "MEMORY" is blinking, press number
buttons on the remote for the station.
select the reception band.
If the Memory indicator on the display
turns off before you preset your station
selection, press MEMORY again.
1.Turn the INPUT knob on the front panel or press TUNER
button on the remote control to select TUNER as the input
source.
on the panel or the remote control to
s desire
number (1-8) buttons on the remote control to s
desire
2.Press A/B/C/D button
elect the group of preset stations that you are .
3.Press elect
the number of preset stations that you are . Station
selected is displayed on the front panel display.
4.In the same way, You can select other stations stored.
RETRIEVING PRESET STATIONS
1. Select the band wave by pressing FM/AM repeatedly.
2. Tune to a radio station (see "Manual tuning" on page 8
above for details).
3.Select a group (A - D) of preset stations. this group will be
displayed on the front panel display. For example: "A".
MANUAL PRESET
4. Press MEMORY button on the remote control."MEMORY"
appears on the display.
5.While the word "MEMORY" is still on, input your desired
preset number (1-8) buttons on the remote control to select
a preset radio station number. For
"MEM OK" appears on the display.
example this number is
"1". This station has been
stored to "A1".
6.Repeat steps 1 to 5 to store other stations.
You can store up to 32 AM and FM stations, these stations can
be stored in random order.
9
STORING STATIONS IN MEMORY
TO STORE A STATION
NOTE:
1.A new setting can be programmed in place of the former one.
2.This memory is forever before reset.
To Next Page
Loading...
