To Next PageTo Next Page
Why is the picture on my Insignia TV DVD Combo not filling the whole screen?
If the picture on your Insignia TV DVD Combo doesn't fill the screen and there are black bars around it, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
Why does my Insignia NS-19ED200NA14 only show snow (noise) on the screen?
If your Insignia TV DVD Combo screen only shows snow (noise), try these steps: - Try another channel. The station may be experiencing problems. - Make sure that the antenna or cable TV is connected correctly and securely. - If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is the picture quality good on some channels but poor on others with my Insignia NS-19ED200NA14 TV DVD Combo?
If the picture quality on your Insignia TV DVD Combo is good on some channels but poor on others, it may be due to a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
Why does my Insignia NS-19ED200NA14 TV DVD Combo display a 'no signal' error message?
If your Insignia TV DVD Combo displays a 'no signal' error message, try the following: - Press the INPUT button and make sure that you have selected the correct input for the device or service you are trying to use. - If you are using a cable or satellite box, use the remote that came with that box to change channels. - Make sure that you have the correct input selected to view channels from the cable or satellite box.
How to fix Insignia NS-19ED200NA14 TV DVD Combo with no color, dark picture, or incorrect color?
If your Insignia TV DVD Combo is showing no color, a dark picture, or incorrect colors, try these steps: - Try another channel. The station may be experiencing problems. - Adjust the color settings. - Make sure that the video cables are connected correctly and securely to your TV. - Make sure that the antenna or cable TV is connected correctly and securely. - If you are using an antenna, the digital channel signal may be low. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
What to do if my Insignia NS-19ED200NA14 has dark, poor, or no picture but sound is good?
If you're getting sound but the picture on your Insignia TV DVD Combo is dark, poor, or nonexistent, here's what to try: - Try another channel as the station may be experiencing problems. - Make sure the antenna or cable TV is connected correctly and securely. - Adjust the brightness. - Make sure the correct picture mode is selected. - If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. - Make sure that the video cables are connected securely to your TV. - The video cable(s) you are using may be bad. Try a new set.
Why is there good picture but no sound on my Insignia NS-19ED200NA14?
If your Insignia TV DVD Combo has a good picture but no sound, try the following: - Increase the volume. - Make sure that the sound is not muted. - Ensure that headphones are not connected, as this will prevent sound from coming from the TV speakers. - Make sure that the correct audio mode is selected. - Make sure that the audio cables are connected correctly and securely to your TV. - Make sure that the antenna or cable TV is connected correctly and securely. - If you are using an antenna, the digital channel signal may be low. - The audio cable(s) you are using may be bad. Try a new set.
Why is there no picture and sound on my Insignia NS-19ED200NA14?
If your Insignia TV DVD Combo has no picture and no sound, try the following: - Press the power button on the TV or the remote control. - Ensure the power adapter is plugged in. - Check that the video cables are securely connected. - Make sure that the correct video input source is selected. - Try another channel as the station may be experiencing problems. - Confirm the incoming signal is compatible. - Ensure the antenna or cable TV is correctly and securely connected. - Verify that the Audio Only option is set to Off. - Adjust the contrast and brightness. - Check the closed caption settings, as some TEXT modes can block the screen.
General| Brand | Insignia |
|---|---|
| Model | NS-19ED200NA14 |
| Category | TV DVD Combo |
| Language | English |
