Insignia NS-28D220NA16 - Connecting a Computer to the TV

25
NS-28D220NA16 28" 720p 60Hz, LED TV
www.insigniaproducts.com
Connecting a computer
1 Make sure that your TV’s power adapter is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the
computer.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
 or  to highlight HDMI 1 or HDMI 2, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
HDMI cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV
NS-28D220NA16_14-1311_MAN_V1_ENG.book Page 25 Friday, April 24, 2015 9:15 AM