Insignia NS-28D220NA16 - Adjusting Time Settings; Setting the TV Clock

60
28" 720p 60Hz, LED TV
www.insigniaproducts.com
Adjusting time settings
This section includes:
• Setting the clock
• Setting the sleep timer
Setting the clock
If you skipped the steps in the Easy Setup wizard for
setting the date and time or if you move your TV to a
different time zone, you can reset the clock to the
correct time.
1 Press MENU.
2 Press
 or  to highlight SETTINGS, then press 
or ENTER.
3 Press
 or  to highlight Time, then press ENTER
or .
4 Press
 or  to highlight Date / Time, then press
ENTER.
5 Press
 or  to highlight Mode, then press ENTER
or
.
6 Press
 or  to highlight Manual (to set the
options manually) or Auto (the options are
automatically set by the TV signal source), then
press ENTER.
7 Press
 or  to highlight Time Zone, then press
ENTER or .
8 Press
 or  to select your time zone, then press
ENTER. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
9 If your viewing area observes Daylight Saving
Time, press
 or  to highlight Daylight Saving,
then press ENTER.
10 Press
 or  to select On or Off, then press ENTER
to close the menu.
11 If you selected Manual for Mode:
• Press
 or  to highlight Date, then press  to
access the option. Press
 or  to highlight
Month, Day, or Ye a r , then press  or  to adjust
the setting. When you are finished, press MENU.
• Press
 or  to highlight Time, then press  to
access the setting. Press
 or  to highlight the
Hour, Minute, or AM/PM field, then press  or 
to adjust the setting.
12 Press MENU to return to the previous menu, or
press EXIT to close the menu.
NS-28D220NA16_14-1311_MAN_V1_ENG.book Page 60 Friday, April 24, 2015 9:15 AM