29
NS-28D220NA16 28" 720p 60Hz, LED TV
www.insigniaproducts.com
Analog audio
When you connect an analog system or sound bar to the /AUDIO OUT jack, the TV speakers are muted.
1 Make sure that your TV’s power adapter is unplugged and the analog speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the AUDIO IN jacks
on the analog speaker system or sound bar.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or sound bar.
5 On your TV’s Audio menu, set the Headphones/Audio Out option to Headphones/Audio Out Variable or Audio
Out Fixed. See the Headphones/Audio Out option in Adjusting sound settings on page 47.
Audio cable
Analog speaker system
Side of TV
Audio cable
connector
/AUDIO OUT
jack
On your TV
Sound bar
NS-28D220NA16_14-1311_MAN_V1_ENG.book Page 29 Friday, April 24, 2015 9:15 AM
To Next Page
Loading...
