Insignia NS-28D220NA16 - Viewing a Favorite Channel; Adding or Changing Channel Labels; Checking Digital Signal Strength

52
28" 720p 60Hz, LED TV
www.insigniaproducts.com
Viewing a favorite channel
1 Press FAVORITE. The Favorite List opens.
2 Press
 or  to highlight a channel, then press
ENTER.
Adding or changing a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
1 Press MENU.
2 Press
 or  to highlight CHANNELS, then press 
or ENTER.
3 Press
 or  to highlight Channel Labels, then
press ENTER or .
4 Press
 or  to select the channel you want to
label, then press  to move to the channel label
field.
5 Press
 or  to select a character, then press  or
 to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11 characters
(letters, numbers, or symbols).
6 When you have completed the label, press ENTER
or MENU to save your label and return to the
Channels menu.
7 Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to determine
if you need to adjust your antenna or digital cable
input. The higher the signal strength, the less likely
you are to experience picture degradation.
1 Press MENU.
2 Press
 or  to highlight CHANNELS, then press 
or ENTER.
3 Press
 or  to highlight Channel Strength, then
press ENTER or
.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
NS-28D220NA16_14-1311_MAN_V1_ENG.book Page 52 Friday, April 24, 2015 9:15 AM