EasyManuals Logo

Insignia NS-32D312NA15 User Manual

Insignia NS-32D312NA15
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
16
Insignia 32" LED TV
www.insigniaproducts.com
Coaxial (good)
1 Make sure that your TVs power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TVs power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. SeeAutomatically scanning for channels” on
page 56.
Notes
Use a coaxial cable to eliminate interference and noise from radio
waves.
Do not bundle the coaxial cable with the power adapter or other cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
ANT/CABLE IN
jack
On your TV

Table of Contents

Other manuals for Insignia NS-32D312NA15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-32D312NA15 and is the answer not in the manual?

Insignia NS-32D312NA15 Specifications

General IconGeneral
Comb filter3D
Screen shapeFlat
Response time8 ms
Display diagonal31.5 \
Display brightness160 cd/m²
Display resolution1366 x 768 pixels
Display technologyLED
Native aspect ratio16:9
Native refresh rate60 Hz
LED backlighting type-
Supported video modes480i, 480p, 720p
Contrast ratio (dynamic)500000:1
Contrast ratio (typical)800:1
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
Product colorBlack
Panel mounting interface200 x 200 mm
RMS rated power10 W
Number of speakers2
Headphone outputs1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Power consumption (standby)1 W
Power consumption (typical)60 W
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)180 mm
Height (with stand)483 mm
Weight (with stand)4800 g
Depth (without stand)82 mm
Width (without stand)744 mm
Height (without stand)443 mm
Weight (without stand)4500 g

Related product manuals